Computer maia

From Jan Prunk
Jump to: navigation, search
  • hostname: maia
  • Manufacturer: SUN
  • Model: Ultra 1
  • architecture: sparc 64bit
  • processor: TI UltraSparc I (SpitFire)
  • Operational system: Linux debian etch
  • bogomips:
  • kernel: 2.6.8-2-sparc64
  • uptime: 94 days
  • Free shell server
  • Location: Slovenia
  • Bandwidth: 4 Mbit
  • OS: Debian GNU/Linux 4.1 lenny
  • Processor: Ultrasparc 1 (64 bit)
  • Processor speed: 160 Mhz
  • Memory: 128 Mb
  • Swap: 256 Mb
  • Drives: sda = 1.8 Gb sdb = 9 Gb
  • Users: 50+ (available)

Usage:

Shell server

dmesg:

PROMLIB: Sun IEEE Boot Prom 3.25.0 1999/12/03 11:36
Linux version 2.6.8-2-sparc64 (root@gimli) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Sat Aug 20 21:27:11 UTC 2005
ARCH: SUN4U
Ethernet address: 08:00:20:86:c4:d2
On node 0 totalpages: 15502
DMA zone: 15502 pages, LIFO batch:3
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro
PID hash table entries: 512 (order 9: 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 3, 65536 bytes)
Memory: 122736k available (1992k kernel code, 600k data, 152k init) [fffff80000000000,0000000007f4c000]
Calibrating delay loop... 331.77 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 3168k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
SYSIO: UPA portID 1f, at 000001fe00000000
sbus0: Clock 25.0 MHz
dma0: Revision 2
dma1: Revision 2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
cg6: CGsix [TGX+ sparc] at 1ff:20000000
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to mono PROM 80x34
Console: switching to colour frame buffer device 144x56
rtc_init: no PC rtc found
SunZilog: 2 chips.
zs2 at 0x000001fff1000004 (irq = 12,7e8) is a SunZilog
zs3 at 0x000001fff1000000 (irq = 12,7e8) is a SunZilog
ttyS0 at MMIO 0x0 (irq = 7125888) is a SunZilog
ttyS1 at MMIO 0x0 (irq = 7125888) is a SunZilog
Console: ttyS0 (SunZilog zs0)
Using anticipatory io scheduler
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: Sun Mouse on zs/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3168 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
SCSI subsystem initialized
esp0: IRQ 4,7e0 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: IBM       Model: DCAS32160SUN2.1G  Rev: S60B
Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
sunlance.c:v2.02 24/Aug/03 Miguel de Icaza (miguel@nuclecu.unam.mx)
SunLance: using auto-carrier-detection.
eth0: LANCE 08:00:20:86:c4:d2
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
USB Universal Host Controller Interface driver v2.2
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 249224k swap on /dev/sda1.  Priority:-1 extents:1
EXT3 FS on sda2, internal journal
eth0: Carrier Lost, trying TPE
NET: Registered protocol family 10
Disabled Privacy Extensions on device 000000000064fc10(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
INTERESTS
Personal tools