This is a new machine, that offers NetBSD shells.
dmesg
NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007 total memory = 127 MB rbus: rbus_min_start set to 0x20000000 avail memory = 115 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xfb330 mainbus0 (root) ACPI Error (tbxfroot-0775): No valid RSDP was found [20060217] ACPI Exception (tbxfroot-0531): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060217] ACPI Exception (tbxface-0162): AE_NO_ACPI_TABLES, Could not get the RSDP [20060217] ACPI Exception (tbxface-0211): AE_NO_ACPI_TABLES, Could not load tables [20060217] ACPI: unable to load tables: AE_NO_ACPI_TABLES cpu0 at mainbus0: (uniprocessor) cpu0: Intel Celeron (Mendocino) (686-class), 400.94 MHz, id 0x665 cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 183f9ff<FXSR> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 128 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0x06) agp0 at pchb0: aperture at 0xd8000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled pcib0 at pci0 dev 7 function 0 pcib0: VIA Technologies VT82C596A PCI-ISA Bridge (rev. 0x09) viaide0 at pci0 dev 7 function 1 viaide0: VIA Technologies VT82C596A (Apollo Pro) ATA33 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel ignored (disabled) pchb1 at pci0 dev 7 function 3 pchb1: VIA Technologies product 0x3050 (rev. 0x00) vga1 at pci0 dev 9 function 0: S3 Trio64V2/DX (rev. 0x16) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 isa0 at pcib0 3COM 3C509B Ethernet card in PnP mode pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 pcppi0: children must have an explicit unit midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 pcppi0: attached to attimer0 isapnp0: read port 0x203 ep0 at isapnp0 port 0x210/16 irq 3 ep0: 3Com 3C509B EtherLink III ep0: address 00:a0:24:e5:bf:0d, 8KB byte-wide FIFO, 5:3 Rx:Tx split ep0: 10baseT, 10base5, 10base2 (default 10base2) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 Kernelized RAIDframe activated atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: <TOSHIBA CD-ROM XM-6702B, , 1005> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) wd0 at atabus0 drive 0: <ST32132A> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 2015 MB, 4095 cyl, 16 head, 63 sec, 512 bytes/sect x 4127760 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2 wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation)